Cold-rolled

Steel for forming

Cold-rolled steel for cold forming and deep drawing is available in a range of grades. Each grade is designed for particular applications – allowing you to pick the best steel for your product.

Our forming steel is available in a choice of widths up to 2050 mm and thicknesses up to 3 mm. This provides opportunities for cutting waste and maximizing yield. These products are made at Tata Steel Nederland using a batch annealing (BA) process.

Cold-rolled annealing line, Port Talbot, UK

Product specification

Cold-rolled steel for forming is currently available in the following grades

EN_US-Engineering-Product-Cold-Rolled-Forming-DS TYPE AB TSE

DS TYPE

Specification details for DS TYPE

EN_US-Engineering-Product-Cold-rolled-Forming-All Grades OverviewTSE

Overview

Cold-rolled steel for cold forming and deep drawing is available in a range of grades. Each grade is designed for particular applications – allowing you to pick the best steel for your product. Our forming steel is available in a choice of widths up to 81 inches and thicknesses up to 0.122 inch. This provides opportunities for cutting waste and maximizing yield.

These products are made at Tata Steel Nederland using batch annealing (CA) process.

Applications

Automotive components and body panels
Components for building
Domestic appliances
Electrical goods
Furniture
Radiators
Tubes

EN_US-Engineering-Product-Cold-rolled-All Grades Surface aspectsTSE

Surface aspects

Surface quality according to ASTM A1008: 2013 and ASTM A568: 2011.

Surface quality class 1 (exposed):

The better side must be free of defects that can spoil the uniform appearance of a high-quality paint or of an electrolytic coating. The other side must at least conform to surface quality unexposed.

Surface quality class 2 (unexposed):

Defects that do not influence the formability or the application of surface coatings are permitted. These are defects such as pores, minor scratches, slight indentations, small grooves or slight discolouration.

Inspected side

As a rule, the upper side of the strip is inspected; on request, the strip can be wound so that the inspected side is the underside.

Surface texture/roughness

Cold-rolled annealed and skin passed steel is available in several surface textures. All textures are available.
Unless specified otherwise, Tata Steel will supply ‘Regular matte’.

Description	Roughness µinch CLA
Commercial bright	≤ 10
H - dull	≤ 16
Light matte	≤ 36
Regular matte	24 - 76
Rough matte	50 - 100

^{Preservative oil}

The standard oil applied by Tata Steel acts as a protective coating. Other types of oil may be available to meet your requirement.

Tata Steel offers a range of oiling levels:
Lightly oiled: 55 mg/ft² per side
Regular oiled: 110 mg/ft² per side

Other oiling levels are available on request. Tata Steel is not responsible for the risk of corrosion during storage or shipment if material is ordered in the unoiled condition.

^{Surface cleanliness}

Tata Steel can guarantee improved surface cleanliness on request for batch annealed products. The cleanliness is tested with a tape test, in which the loss of reflection is measured. The reflection gives an indication of the oil residue on the annealed product.
Two levels of loss of reflectivity are available for batch annealed products: a maximum of 20% or a maximum of 30%.

EN_US-Engineering-Product-Cold-Rolled-Forming-DS TYPE AB-Properties TSE

Properties

Mechanical properties

Cold-rolled forming steels have the following ranges of mechanical properties (nonmandatory). They are provided to assist the purchaser in specifying a suitable steel for a given application. The mechanical properties are measured longitudinal to the rolling direction.

Grade	ASTM A1008: 2013	DS Type A and B
Yield strength	ksi	22 - 35
Elongation	%	36
r_m-value		1.3 - 1.7
n-value		0.17 - 0.22

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

Chemical composition

Cold-rolled steel for forming supplied by Tata Steel complies to the following heat analysis with maximum values unless otherwise shown.

ASTM A1008: 2013	Grade	DS Type A	DS Type B
C	Max.	0.08	0.02 - 0.08
Mn	Max.	0.50	0.50
P	Max.	0.020	0.020
S	Max.	0.030	0.030
Al	Min.	0.01	0.02
V	Max.	0.008	0.008
Cb	Max.	0.008	0.008
Ti	Max.	0.025	0.025

All values in weight%

EN_US-Engineering-Product-Cold-Rolled-Forming-DS TYPE AB-Dimensions TSE

Dimensions

For batch annealed (BA) products.
Dimensions in inches.

Thickness	Max. width
From - up to	DS Type A and B
0.015 - 0.016	60
0.016 - 0.018	65
0.018 - 0.020	66
0.020 - 0.024	69
0.024 - 0.030	71
0.030 - 0.040	75
0.040 - 0.045	79
0.045 - 0.070	80
0.070 - 0.080	77
0.080 - 0.090	70
0.090 - 0.100	62
0.100 - 0.110	58
0.110 - 0.120	54

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.

EN_US-Engineering-Product-Cold-rolled-All grades Shape and dimensional tolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under. Tighter tolerances are available as shown below:

Carbon Steel	Thickness tolerances available
	ASTM A 568 (2015) / A635 (2015)
	20 - 40	40 - 48	48 - 60	60 - 72	>72
0.031 - 0.051	0.01	0.01	0.01	0.01	0.01
0.051 - 0.057	0.01	0.012	0.012	0.014	0.014
0.057 - 0.071	0.012	0.012	0.014	0.014	0.014
0.071 - 0.098	0.014	0.014	0.014	0.016	0.016
0.098 - 0.179	0.014	0.016	0.016	0.016	0.016
0.179 - 0.229	0.016	0.018	0.02	0.022	0.024
0.229 - 0.313	0.022	0.024	0.024	0.026	0.03
0.313 - 0.375	0.024	0.026	0.028	0.03	0.032
0.375 - 0.500	0.028	0.028	0.03	0.032	0.036
0.500 - 0.625	0.03	0.03	0.032	0.036	0.038
0.625 - 1.000	0.032	0.032	0.034	0.038	0.04

HSLA	Thickness tolerances available
	ASTM A568 (2007) / A635 (2007)
	20 - 32	32 - 40	40 - 48	48 - 60	60 - 72	72 - 80	> 80
0.031 - 0.051	0.012	0.012	0.012	0.012	0.012	0.012	0.012
0.051 - 0.059	0.012	0.012	0.014	0.014	0.014	0.014	0.014
0.059 - 0.070	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.070 - 0.082	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.082 - 0.098	0.014	0.016	0.116	0.016	0.018	0.018	0.02
0.098 - 0.179	0.016	0.016	0.02	0.02	0.022	0.024	0.024
0.179 - 0.229	0.018	0.018	0.02	0.02	0.022	0.024	0.024
0.229 - 0.313	0.022	0.022	0.024	0.024	0.026	0.03	0.03
0.313 - 0.375	0.024	0.024	0.026	0.028	0.03	0.032	0.032
0.375 - 0.500	0.028	0.028	0.028	0.03	0.032	0.036	0.036
0.500 - 0.625	0.03	0.03	0.03	0.032	0.036	0.038	0.038
0.625 - 1.000	0.032	0.032	0.032	0.034	0.038	0.04	0.04

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007).
Width tolerances are over, no tolerance under.

Width tolerances available
Carbon steel	ASTM A568: 2015 / A635: 2015
Carbon steel	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	0.937	0.125
30 - 35	1.125	0.187
35 - 48	1.125	0.187
48 - 50	1.125	0.25
50 - 60	1.5	0.25
60 - 65	1.5	0.312
65 - 70	1.5	0.312
70 - 78	1.5	0.312
78 - 80	1.875	0.312
80 - 82	1.875	0.375

Width tolerances available
HSLA	ASTM A568: 2007 / A635: 2007
HSLA	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	1.125	0.125
30 - 35	1.125	0.187
35 - 48	1.25	0.187
48 - 50	1.25	0.25
50 - 60	1.5	0.25
60 - 65	1.625	0.312
65 - 70	1.75	0.312
70 - 78	1.875	0.312
78 - 80	2	0.375
80 - 82	1.875	0.375

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description	Capability
Coil diameter inner non-pickled	30 inch
Coil diameter inner pickled	24 inch standard
Coil diameter inner pickled	30 inch on request
Tolerance on inner diameter	+0/-2 inch
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 41.5 inch
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 65 inch
Coil weight	Max. 75,000 lbs
	Maximum coil weight limits can vary due to
	transport limits and outer coil diameter
	Some HR products may have different coil weight ranges
PIW width ≤ 47 inch	868 - 1288 PIW width
PIW 47 inch < width ≤ 67 inch	868 - 1215 PIW width
PIW width > 67 inch	616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order	Refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN_US-Engineering-Product-Cold-Rolled-Forming-DDS TSE

DDS

Specification details for DDS

EN_US-Engineering-Product-Cold-rolled-Forming-All Grades OverviewTSE

Overview

These products are made at Tata Steel Nederland using batch annealing (CA) process.

Applications

Automotive components and body panels
Components for building
Domestic appliances
Electrical goods
Furniture
Radiators
Tubes

EN_US-Engineering-Product-Cold-rolled-All Grades Surface aspectsTSE

Surface aspects

Surface quality according to ASTM A1008: 2013 and ASTM A568: 2011.

Surface quality class 1 (exposed):

The better side must be free of defects that can spoil the uniform appearance of a high-quality paint or of an electrolytic coating. The other side must at least conform to surface quality unexposed.

Surface quality class 2 (unexposed):

Inspected side

As a rule, the upper side of the strip is inspected; on request, the strip can be wound so that the inspected side is the underside.

Surface texture/roughness

Cold-rolled annealed and skin passed steel is available in several surface textures. All textures are available.
Unless specified otherwise, Tata Steel will supply ‘Regular matte’.

Description	Roughness µinch CLA
Commercial bright	≤ 10
H - dull	≤ 16
Light matte	≤ 36
Regular matte	24 - 76
Rough matte	50 - 100

^{Preservative oil}

The standard oil applied by Tata Steel acts as a protective coating. Other types of oil may be available to meet your requirement.

Tata Steel offers a range of oiling levels:
Lightly oiled: 55 mg/ft² per side
Regular oiled: 110 mg/ft² per side

Other oiling levels are available on request. Tata Steel is not responsible for the risk of corrosion during storage or shipment if material is ordered in the unoiled condition.

^{Surface cleanliness}

EN_US-Engineering-Product-Cold-Rolled-Forming-DDS-Properties TSE

Properties

Mechanical properties

Grade	ASTM A1008: 2013	DDS
Yield strength	ksi	17 - 29
Elongation	%	38
r_m-value		1.4 - 1.8
n-value		0.20 - 0.25

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

Chemical composition

Cold-rolled steel for forming supplied by Tata Steel complies to the following heat analysis with maximum values unless otherwise shown.

ASTM A1008: 2013	Grade	DDS
C	Max.	0.06
Mn	Max.	0.50
P	Max.	0.020
S	Max.	0.025
Al	Min.	0.01
V	Max.	0.008
Cb	Max.	0.008
Ti	Max.	0.025

All values in weight%.

EN_US-Engineering-Product-Cold-Rolled-Forming-DDS-Dimensions TSE

Dimensions

For batch annealed (BA) products.
Dimensions in inches.

Thickness	Max. width
From - up to	DDS
0.015 - 0.016	-
0.016 - 0.018	68
0.018 - 0.020	69
0.020 - 0.024	72
0.024 - 0.030	74
0.030 - 0.040	79
0.040 - 0.050	80
0.050 - 0.055	74
0.055 - 0.065	71
0.065 - 0.070	68
0.070 - 0.080	62
0.080 - 0.090	54
0.090 - 0.100	52

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.

EN_US-Engineering-Product-Cold-rolled-All grades Shape and dimensional tolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under. Tighter tolerances are available as shown below:

Carbon Steel	Thickness tolerances available
	ASTM A 568 (2015) / A635 (2015)
	20 - 40	40 - 48	48 - 60	60 - 72	>72
0.031 - 0.051	0.01	0.01	0.01	0.01	0.01
0.051 - 0.057	0.01	0.012	0.012	0.014	0.014
0.057 - 0.071	0.012	0.012	0.014	0.014	0.014
0.071 - 0.098	0.014	0.014	0.014	0.016	0.016
0.098 - 0.179	0.014	0.016	0.016	0.016	0.016
0.179 - 0.229	0.016	0.018	0.02	0.022	0.024
0.229 - 0.313	0.022	0.024	0.024	0.026	0.03
0.313 - 0.375	0.024	0.026	0.028	0.03	0.032
0.375 - 0.500	0.028	0.028	0.03	0.032	0.036
0.500 - 0.625	0.03	0.03	0.032	0.036	0.038
0.625 - 1.000	0.032	0.032	0.034	0.038	0.04

HSLA	Thickness tolerances available
	ASTM A568 (2007) / A635 (2007)
	20 - 32	32 - 40	40 - 48	48 - 60	60 - 72	72 - 80	> 80
0.031 - 0.051	0.012	0.012	0.012	0.012	0.012	0.012	0.012
0.051 - 0.059	0.012	0.012	0.014	0.014	0.014	0.014	0.014
0.059 - 0.070	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.070 - 0.082	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.082 - 0.098	0.014	0.016	0.116	0.016	0.018	0.018	0.02
0.098 - 0.179	0.016	0.016	0.02	0.02	0.022	0.024	0.024
0.179 - 0.229	0.018	0.018	0.02	0.02	0.022	0.024	0.024
0.229 - 0.313	0.022	0.022	0.024	0.024	0.026	0.03	0.03
0.313 - 0.375	0.024	0.024	0.026	0.028	0.03	0.032	0.032
0.375 - 0.500	0.028	0.028	0.028	0.03	0.032	0.036	0.036
0.500 - 0.625	0.03	0.03	0.03	0.032	0.036	0.038	0.038
0.625 - 1.000	0.032	0.032	0.032	0.034	0.038	0.04	0.04

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007).
Width tolerances are over, no tolerance under.

Width tolerances available
Carbon steel	ASTM A568: 2015 / A635: 2015
Carbon steel	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	0.937	0.125
30 - 35	1.125	0.187
35 - 48	1.125	0.187
48 - 50	1.125	0.25
50 - 60	1.5	0.25
60 - 65	1.5	0.312
65 - 70	1.5	0.312
70 - 78	1.5	0.312
78 - 80	1.875	0.312
80 - 82	1.875	0.375

Width tolerances available
HSLA	ASTM A568: 2007 / A635: 2007
HSLA	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	1.125	0.125
30 - 35	1.125	0.187
35 - 48	1.25	0.187
48 - 50	1.25	0.25
50 - 60	1.5	0.25
60 - 65	1.625	0.312
65 - 70	1.75	0.312
70 - 78	1.875	0.312
78 - 80	2	0.375
80 - 82	1.875	0.375

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description	Capability
Coil diameter inner non-pickled	30 inch
Coil diameter inner pickled	24 inch standard
Coil diameter inner pickled	30 inch on request
Tolerance on inner diameter	+0/-2 inch
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 41.5 inch
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 65 inch
Coil weight	Max. 75,000 lbs
	Maximum coil weight limits can vary due to
	transport limits and outer coil diameter
	Some HR products may have different coil weight ranges
PIW width ≤ 47 inch	868 - 1288 PIW width
PIW 47 inch < width ≤ 67 inch	868 - 1215 PIW width
PIW width > 67 inch	616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order	Refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN_US-Engineering-Product-Cold-Rolled-Forming-EDDS TSE

EDDS

Specification details for EDDS

EN_US-Engineering-Product-Cold-rolled-Forming-All Grades OverviewTSE

Overview

These products are made at Tata Steel Nederland using batch annealing (CA) process.

Applications

Automotive components and body panels
Components for building
Domestic appliances
Electrical goods
Furniture
Radiators
Tubes

EN_US-Engineering-Product-Cold-rolled-All Grades Surface aspectsTSE

Surface aspects

Surface quality according to ASTM A1008: 2013 and ASTM A568: 2011.

Surface quality class 1 (exposed):

The better side must be free of defects that can spoil the uniform appearance of a high-quality paint or of an electrolytic coating. The other side must at least conform to surface quality unexposed.

Surface quality class 2 (unexposed):

Inspected side

As a rule, the upper side of the strip is inspected; on request, the strip can be wound so that the inspected side is the underside.

Surface texture/roughness

Cold-rolled annealed and skin passed steel is available in several surface textures. All textures are available.
Unless specified otherwise, Tata Steel will supply ‘Regular matte’.

Description	Roughness µinch CLA
Commercial bright	≤ 10
H - dull	≤ 16
Light matte	≤ 36
Regular matte	24 - 76
Rough matte	50 - 100

^{Preservative oil}

The standard oil applied by Tata Steel acts as a protective coating. Other types of oil may be available to meet your requirement.

Tata Steel offers a range of oiling levels:
Lightly oiled: 55 mg/ft² per side
Regular oiled: 110 mg/ft² per side

Other oiling levels are available on request. Tata Steel is not responsible for the risk of corrosion during storage or shipment if material is ordered in the unoiled condition.

^{Surface cleanliness}

EN_US-Engineering-Product-Cold-Rolled-Forming-EDDS-Properties TSE

Properties

Mechanical properties

Grade	ASTM A1008: 2013	EDDS
Yield strength	ksi	15 - 25
Elongation	%	40
r_m-value		1.7 - 2.1
n-value		0.23 - 0.27

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

Chemical composition

Cold-rolled steel for forming supplied by Tata Steel complies to the following heat analysis with maximum values unless otherwise shown.

ASTM A1008: 2013	Grade	EDDS¹
C	Max.	0.02
Mn	Max.	0.40
P	Max.	0.020
S	Max.	0.020
Al	Min.	0.01
V	Max.	0.10
Cb	Max.	0.10
Ti	Max.	0.15

^1. EDDS shall be furnished as a vacuum degassed and stabilized steel.
All values in weight%.

EN_US-Engineering-Product-Cold-Rolled-Forming-EDDS-Dimensions TSE

Dimensions

For batch annealed (BA) products.
Dimensions in inches.

Thickness	Max. width
From - up to	EDDS
0.016 - 0.018	-
0.018 - 0.020	45
0.020 - 0.024	75
0.024 - 0.030	79
0.030 - 0.055	80
0.055 - 0.065	75
0.065 - 0.070	67
0.070 - 0.080	61

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.

EN_US-Engineering-Product-Cold-rolled-All grades Shape and dimensional tolerancesTSE

Shape and dimensional tolerances

Tolerances on thickness

Tata Steel can supply to full thickness tolerance specified in ASTM A568: 2015 / A635: 2015.
Thickness tolerances over, no tolerance under. Tighter tolerances are available as shown below:

Carbon Steel	Thickness tolerances available
	ASTM A 568 (2015) / A635 (2015)
	20 - 40	40 - 48	48 - 60	60 - 72	>72
0.031 - 0.051	0.01	0.01	0.01	0.01	0.01
0.051 - 0.057	0.01	0.012	0.012	0.014	0.014
0.057 - 0.071	0.012	0.012	0.014	0.014	0.014
0.071 - 0.098	0.014	0.014	0.014	0.016	0.016
0.098 - 0.179	0.014	0.016	0.016	0.016	0.016
0.179 - 0.229	0.016	0.018	0.02	0.022	0.024
0.229 - 0.313	0.022	0.024	0.024	0.026	0.03
0.313 - 0.375	0.024	0.026	0.028	0.03	0.032
0.375 - 0.500	0.028	0.028	0.03	0.032	0.036
0.500 - 0.625	0.03	0.03	0.032	0.036	0.038
0.625 - 1.000	0.032	0.032	0.034	0.038	0.04

HSLA	Thickness tolerances available
	ASTM A568 (2007) / A635 (2007)
	20 - 32	32 - 40	40 - 48	48 - 60	60 - 72	72 - 80	> 80
0.031 - 0.051	0.012	0.012	0.012	0.012	0.012	0.012	0.012
0.051 - 0.059	0.012	0.012	0.014	0.014	0.014	0.014	0.014
0.059 - 0.070	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.070 - 0.082	0.014	0.014	0.014	0.014	0.016	0.016	0.016
0.082 - 0.098	0.014	0.016	0.116	0.016	0.018	0.018	0.02
0.098 - 0.179	0.016	0.016	0.02	0.02	0.022	0.024	0.024
0.179 - 0.229	0.018	0.018	0.02	0.02	0.022	0.024	0.024
0.229 - 0.313	0.022	0.022	0.024	0.024	0.026	0.03	0.03
0.313 - 0.375	0.024	0.024	0.026	0.028	0.03	0.032	0.032
0.375 - 0.500	0.028	0.028	0.028	0.03	0.032	0.036	0.036
0.500 - 0.625	0.03	0.03	0.03	0.032	0.036	0.038	0.038
0.625 - 1.000	0.032	0.032	0.032	0.034	0.038	0.04	0.04

Option for maximum crown values

At the time of ordering, specific agreements can be made on the crown of hot-rolled strip.

Tolerances on width, edge camber and flatness

Material will be supplied conforming to the tolerances specified in ASTM A568 (2007) / A635 (2007).
Width tolerances are over, no tolerance under.

Width tolerances available
Carbon steel	ASTM A568: 2015 / A635: 2015
Carbon steel	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	0.937	0.125
30 - 35	1.125	0.187
35 - 48	1.125	0.187
48 - 50	1.125	0.25
50 - 60	1.5	0.25
60 - 65	1.5	0.312
65 - 70	1.5	0.312
70 - 78	1.5	0.312
78 - 80	1.875	0.312
80 - 82	1.875	0.375

Width tolerances available
HSLA	ASTM A568: 2007 / A635: 2007
HSLA	Mill edge	Cut edge
24 - 26	0.812	0.125
26 - 28	0.937	0.125
28 - 30	1.125	0.125
30 - 35	1.125	0.187
35 - 48	1.25	0.187
48 - 50	1.25	0.25
50 - 60	1.5	0.25
60 - 65	1.625	0.312
65 - 70	1.75	0.312
70 - 78	1.875	0.312
78 - 80	2	0.375
80 - 82	1.875	0.375

Dimensions and coil weights

Tata Steel can supply hot-rolled steels with the following minimum and maximum dimensions and weights.

Description	Capability
Coil diameter inner non-pickled	30 inch
Coil diameter inner pickled	24 inch standard
Coil diameter inner pickled	30 inch on request
Tolerance on inner diameter	+0/-2 inch
Coil diameter outer non-pickled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 41.5 inch
Coil diameter outer pickled and oiled	Outer diameter available is 10/7 x width to reduce possibility of coil tipping over
	Max. 86 inch
	Min. 65 inch
Coil weight	Max. 75,000 lbs
	Maximum coil weight limits can vary due to
	transport limits and outer coil diameter
	Some HR products may have different coil weight ranges
PIW width ≤ 47 inch	868 - 1288 PIW width
PIW 47 inch < width ≤ 67 inch	868 - 1215 PIW width
PIW width > 67 inch	616 PIW width and 868 - 1215 PIW width
Minimum tonnage per order	Refer to price list for order quantity details
Minimum tonnage per order	Minimum order quantities may apply

EN_US-Tata Steel in the USA and Canada

Contact for questions and inquiries

Tata Steel in the USA and Canada

+1 847 619 0400 or 1800 542 6244 (N. America only)

chicago@tatasteeleurope.com

Chicago office
475 N. Martingale Road, Suite 330
Schaumburg, IL 60173
United States

Steel for forming

Overview

Applications

Surface aspects

Surface quality class 1 (exposed):

Surface quality class 2 (unexposed):

Inspected side

Surface texture/roughness

Preservative oil

Surface cleanliness

Properties

Mechanical properties

Min. elongation after fracture A uses test piece length L0 = 2 inches.

Chemical composition

All values in weight%

Dimensions

Minimum width is 30 inch for all BA products. Other dimensions may be available – please contact us.

Shape and dimensional tolerances

Tolerances on thickness

Option for maximum crown values

Tolerances on width, edge camber and flatness

Dimensions and coil weights

Overview

Applications

Surface aspects

Surface quality class 1 (exposed):

Surface quality class 2 (unexposed):

Inspected side

Surface texture/roughness

Preservative oil

Surface cleanliness

Properties

Mechanical properties

Min. elongation after fracture A uses test piece length L0 = 2 inches.

Chemical composition

All values in weight%.

Dimensions

Minimum width is 30 inch for all BA products. Other dimensions may be available – please contact us.

Shape and dimensional tolerances

Tolerances on thickness

Option for maximum crown values

Tolerances on width, edge camber and flatness

Dimensions and coil weights

Overview

Applications

Surface aspects

Surface quality class 1 (exposed):

Surface quality class 2 (unexposed):

Inspected side

Surface texture/roughness

Preservative oil

Surface cleanliness

Properties

Mechanical properties

Min. elongation after fracture A uses test piece length L0 = 2 inches.

Chemical composition

1. EDDS shall be furnished as a vacuum degassed and stabilized steel. All values in weight%.

Dimensions

Minimum width is 30 inch for all BA products. Other dimensions may be available – please contact us.

Shape and dimensional tolerances

Tolerances on thickness

Option for maximum crown values

Tolerances on width, edge camber and flatness

Dimensions and coil weights

High-strength steel

Tata Steel offers a range of cold-rolled steels for applications requiring high strength without the weight penalty

Steel for forming

Steel for forming

Hot-rolled steel for cold forming is used for bending and deep drawing in a wide range of applications

Tata Steel in the USA and Canada

^{Preservative oil}

^{Surface cleanliness}

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.

^{Preservative oil}

^{Surface cleanliness}

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.

^{Preservative oil}

^{Surface cleanliness}

Min. elongation after fracture A uses test piece length L₀ = 2 inches.

^1. EDDS shall be furnished as a vacuum degassed and stabilized steel.
All values in weight%.

Minimum width is 30 inch for all BA products.
Other dimensions may be available – please contact us.